Area Call Screen; M Area Setting - Icom VE-PG4 Operating Manual

6
TRANSCEIvER CoNTRoLLER

Area Call screen

Transceiver Controller > RoIP Server Settings > Area Call
■ Area Setting
The Area call function limits communication with the devices in the specified area.
When an IP100H makes an All call or Group call using the Area call function, it calls other IP100Hs or IP100FSs in the
same area.
L If you want to use the Area call from an IP100FS, specify the area by selecting the desired access points.
3
No. �����������
1
Name ����������
2
BSSID ���������
3
<Apply> ��������
4
<Reset> ��������
5
The IP100H makes All calls in the area
Example: The wireless access points "Sales" and "Accounts" are registered in the same
1
2
Select the number that is registered to the Area call.
L Up to 20 calls can be registered.
Enter the area name of up to 31 characters.
Enter the 12 digit BSSID of the wireless access point in the area.
When several access points are added, they are recognized as one
area.
L Up to 20 access points can be registered to the area.
Click to add the entries.
L The entries are displayed in [Area Entry List].
Click to reset the settings.
L You cannot reset after clicking <Apply>.
area. The access point "Parts" is registered in a different area.
In that case, two IP100Hs in the same area receive the call, but the IP100H in
the different area will not receive it.
VE-PG4
Sales
IP100H
4
Accounts
All call
The settings of the "Transceiver Settings"
item are necessary to use the Area call
function for the each IP100H.
6-11
5
(Default: 1)
Wireless
access point
Parts