Icom VE-PG4 Operating Manual page 236

8
DESTINATIoN SETTINGS
Destination Settings screen
Destination Settings > Destination Settings
■ Destination Settings (Telephone)
The settings to call the registered telephone through the IP network.
L The displayed contents are changed according to the Call Type.
This is an example of setting "Telephone" as the Call Type
No. �����������
1
Name ����������
2
Call Type ��������
3
Destination Phone Number �
4
<Apply> ��������
5
<Reset> ��������
6
1
2
3
4
Select the number to register the destination station.
Up to 1990 destinations can be registered.
Enter a destination name of up to 31 characters.
Select "Telephone" for Telephone calls.
L This Call Type includes the transceivers connected by the Bridge Connection
through a VE-PG4.
Enter a destination phone number of up to 31 digit numbers and
characters (# or *).
Click to apply the entries.
L The registered contents are displayed in [List of Destination Setting Entries
(Telephone)].
Click to reset the settings.
L You cannot reset after clicking <Apply>.
8-21
5 6
.
(3)