Snmp Screen - Icom VE-PG4 Operating Manual

15
MANAGEMENT

SNMP screen

Management > SNMP
■ SNMP
Configure the SNMP function, that is information on the RoIP Gateway for being collected by each host in the
IP network for their network management.
SNMP����������
1
Community Name (GET) �
2
System Location ����
3
System Contact �����
4
<Apply> ��������
5
<Reset> ��������
6
1
2
3
4
Select "Enable" to manage the setting information in the SNMP
management tool.
Enter the Community name to get the SNMP community string. (Up to
31 characters)
Enter the SNMP system location. (Up to 127 characters)
Enter the SNMP system contact. (Up to 127 characters)
Click to apply the entries.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
15-14
5
6
(Default: Enable)
(Default: public)