Icom VE-PG4 Operating Manual page 112

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
(This is an example of when the [VOX] (26) is set to "Enable.")
Attack Time �������
27
VOX: Enable
Release Time ������
28
VOX: Enable
Voice Delay �������
29
VOX: Enable
Voice Threshold �����
30
VOX: Enable
Sidetone ��������
31
VOX: Enable
Sidetone Volume ����
32
VOX: Enable
26
27
28
29
30
31
32
Adjust the Attack time
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
When audio from a headset microphone is input for this specified time,
the IP100H starts transmitting.
Adjust the Release time.
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
The release time is amount of time the transmitter stays oN after you
stop speaking.
Adjust the Voice Delay time to prevent clipping of the first few syllables
after you begin speaking.
• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps
Adjust the VOX Threshold level.
• Range: 0 ~ 100 (%)
L The higher values make the VOX function more sensitive to your voice.
Select whether or not to use the Sidetone function.
When "Enable" is selected, you can hear your voice from the headset.
Adjust the Sidetone level.
• Range: 0 (minimum) ~ 32 (maximum)
6-41
(Default: 50)
(Default: 200)
(Default: 200)
(Default: 40)
(Default: Disable)
(Default: 10)