Icom VE-PG4 Operating Manual page 108

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
option key ........................
20
NOTE:
The RoIP Gateway should not be used when high reliability is necessary.
The communication cannot be made, depending on the environment around the RoIP Gateway, such as the
consumption of a battery, the signal environment, or the access point or network status.
Use the [Emergency] and [Lone Worker] functions as a supplementary function.
19
20
21
22
• Emergency
Hold down the [Option] key until "Emergency" is displayed to send an
Emergency call.
When the Emergency call is sent, an alarm sounds. The Emergency
call is canceled and the alarm stops when the transceiver receives a
response, or the [Option] key of the transceiver is held down.
L You can set the period of time to send the Emergency call, and sound the
alarm, in [Emer SW ON Timer] (35).
L When "Enable" is selected in [Emer SW OFF] (36), you can set the period
of time to cancel the Emergency call and stop the alarm.
Push
[Option] key
6-37
Emergency
All