Icom VE-PG4 Operating Manual page 35

4
RouTER SETTINGS
WAN screen
Router Settings > WAN
■ Connection Settings
(When "Connection Type" is set to "Static IP")
Set the WAN.
Nickname ��������
1
IP Address �������
2
Subnet Mask ������
3
Default Gateway �����
4
Primary DNS Server ���
5
Secondary DNS Server �
6
<Apply> ��������
7
<Reset> ��������
8
1
2
3
4
5
6
Enter your service provider's name of up to 31 characters.
Enter the WAN IP address.
Enter the WAN Subnet Mask
Enter the WAN Default Gateway.
Enter the DNS server address specified by your service provider.
If you have two DNS server addresses, enter the primary address.
If you have two DNS server addresses, enter the secondary DNS
server address.
Click to apply the entries.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
4-8
7 8