Table of Contents
Advertisement
6
TRANSCEIvER CoNTRoLLER
Wireless LAN screen
Transceiver Controller > Common Settings > Wireless LAN
■ Wireless LAN
7
Encryption �������
9
1
2
3
4
5
6
8
Select the encryption type that is the same as that of the wireless
access point.
L Be sure to verify the access point setting, because the terminals and access
points cannot communicate using different encryption.
About the encryption types
• None
No data is encrypted.
L This option can be selected when [Authentication] (8) is set to "open
System" or "Open System/Shared Key."
• WEP RC4
It is an encryption type that can communicate when the encryption
keys match.
L You can set the encryption key length to between 64 (40) and 128 (104) bits.
L You can select this option when [Authentication] (8) is set to "open
System" or "Open System/Shared Key."
• TKIP/AES
Either the "TKIP" or "AES" encryptions are automatically recognized
when connecting to a wireless access point.
L You can select this option when [Authentication] (8) is set to "WPA-PSK/
WPA2-PSK."
9
11 12
6-58
10
(Default: None)
Advertisement
Chapters
Table of Contents
