Icom VE-PG4 Operating Manual page 149

6
TRANSCEIvER CoNTRoLLER
Profile screen
Transceiver Controller > Common Settings > Profile
■ Profile
Courtesy Beep �����
17
Out of Service Area Notice
18
Tone ����������
Sidetone Mute ������
19
12
13
14
15
16
17
18
19
Select a
Notice Tone
L This tone can be individually assigned to each call type, "Individual Call,"
"Group Call," "All Call," and "Telephone."
L You can select "Not Use" or "Tone 1" to "Tone 8."
L After each received call is completed, the IP100H will sound the specified tone.
Select whether or not the IP100H sounds the out of service area
When "Enable" is selected, the IP100H sounds the
goes out the service area or returns to the service area.
Select whether or not the IP100H uses the Side Tone Mute function.
When "Enable" is selected, the IP100H mutes the sidetone or monitor
audio when it goes out the service area. At that time, you cannot hear
your voice from a head set or earphone speaker.
L When "Monitor" or "Sidetone" is set to "Disable" in the Transceiver Settings
menu, this function is not activated.
when a received call is finished.
6-78
(Default: Tone 1)
.
Notice Tone
(Default: Disable)
when it
Notice Tone
(Default: Disable)