Icom VE-PG4 Operating Manual page 196

7
CONNECTION PORT SETTINgS
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■ EXT Input Settings
L 18,19, and are displayed when Input Control (7) is set to "VOX."
20
Voice Delay
17
A ttack Time
18
Input Control: VOX
Release Time
19
Input Control: VOX
VOX Threshold
20
Input Control: VOX
6
7
8
9
10
11
18
19
17
20
Set the audio signal buffer time.
• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps
Set the TX Attack time. It is the delay time before the VOX switch turns
ON after an audio signal is received through the network. (Default: 50)
• Range: 5 ~ 2000 (milliseconds)
Set the RX Delay time. It is the delay time for the VOX switch to turn
OFF after no audio signal is received through the network.
• Range: 5 ~ 2000 (milliseconds)
Enter the voice threshold level.
• Range: 0 ~ 100 (%)
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
Refer to the INSTALLATION gUIDE Section 6 for the port details.
(Default: when Input Control is "VOX"=50, others=5)
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
7-42
(Default: 200)
(Default: 40)