Icom VE-PG4 Operating Manual page 150

6
TRANSCEIvER CoNTRoLLER
Profile screen
Transceiver Controller > Common Settings > Profile
■ Profile
Destination ID ������
20
Caller ID Display
21
(for All and Group Calls) �
Date Format �������
22
20
21
22
23
24
25
26
27
Select a destination ID that will be displayed after returning to the
standby mode.
• Disable:
• Transmit:
• Transmit and Receive: Displays either IDs that the IP100H recently called or
• All Operations:
Select whether or not the IP100H displays the Caller ID in the All call or
Group call.
• Disable: When the IP100H or IP100FS receives an All call or Group call, only
the Call type is displayed.
• Enable: When the IP100H or IP100FS receives an All call or Group call,
both Call type and Caller ID are displayed.
• When receiving an All Call
10/8 16 ： 57
All
• When receiving an All Call Message
Select a date format to display on the IP100H's standby screen.
You can select "MM/DD," "DD/MM," "MM-DD," "DD-MM," "MM.DD," or
"DD. MM." (MM: Month, DD: Day)
(Default: Disable)
Displays the destination ID
or call type that is specified
in [Destination ID] on the
[Transceiver Settings]
screen.
Displays the IDs that the IP100H recently called.
was called by.
Displays either IDs that the IP100H recently called,
was called by or displays the ID list/History.
Alternately
displayed
10/8 16 ： 57
All[Sales 1]Gather i
6-79
10/8 16:57
All
Destination ID
(Call type)
(Default: Disable)
10/8 16 ： 57
Sales 1
Received message
(Default: MM/DD)