Icom VE-PG4 Operating Manual page 230

8
DESTINATIoN SETTINGS
Destination Settings screen
Destination Settings > Destination Settings
■ Destination Settings (Talkgroup)
This is an example of setting "Talkgroup" as the Call Type
IP100FS .
(8)
Communication Type ��
6
Talkgroup Call for IP100FS �
7
Callee ID for IP100FS ��
8
1
2
3
4
5
6
7
8
Select "Simplex" or "Full-Duplex."
• Simplex operation
L When "Simplex" is selected, the called station cannot reply until the caller
Simplex operation
station stops transmitting.
When "Simplex" is selected, the called station cannot reply until the caller station stops transmitting.
Wireless access point
(Example: AP-95M)
IP100H
• Full-Duplex operation
Full-Duplex operation
Wireless access point
(Example: AP-95M)
IP100H
Select whether or not the Talkgroup Call includes the IP100FS.
Select the IP100FS to be called when "Enable" is selected in [Talkgroup
Call for IP100FS]
L When "Appointment" is selected, you can register up to 5 IP100FS's
destination IDs (4digits).
L This item is not displayed when "Disabled" is selected in [Talkgroup Call for
IP100FS] (7).
L In the Multiplex Talkgroup, the settings for the IP100FS must be the same for
all the Talkgroups.
8-15
, and "Appointment" as the Callee ID for
(3)
.
(7)
(Default: Full-Duplex)
VE-PG4
IP100FS
(Remote Communicator)
VE-PG4
IP100FS
(Remote Communicator)
(Default: Enable)
(Default: All)