Icom VE-PG4 Operating Manual page 362

13
PBX EXTEnSIon
Converter Bridge screen
PBX Extension > Converter Bridge
■ DTMF Dialing
Set details on DTMF Dialing through a Converter Bridge connection port.
L The screen above shows when "DTMF Dialing" (1) is set to "Enable."
DTMF Dialing ������
1
Permissible Tone Gap ��
2
OFF-hook Detect Timer �
3
ON-hook Detect Timer ��
4
1
2
3
4
Select "Enable" to use DTMF signaling.
If enabled, set the details in the timer.
Set the period of time to detect that the last digit has been input.
• Range: 1 ~ 10 (seconds)
L Applied only when a 1 digit number is set to the oFF-hook settings in the
Special number screen.
Set the period of time to detect the on-hook control signal.
• Range: 0 ~ 2000 (milliseconds)
L Applied only when a 1 digit number is set to the oFF-hook settings in the
Special number screen.
Select the period of time to detect the on-hook control signal.
• Range: 0 ~ 2000 (milliseconds)
13-69
(Default: Disable)
(Default: 5)
(Default: 400)
(Default: 400)