13
PBX EXTEnSIon
Transceiver Controller Telephone Connection screen
PBX Extension > Transceiver Controller Telephone Connection
■ Control
The settings for communication control between a SIP phone and a transceiver that are linked to the RoIP
gateway.
PTT Call Cancel on
1
Call Incoming ������
Target Availability Check �
2
Timing of Target
3
Availability Check ����
1
2
3
4
5
6
7
8
9
Select "Enable" to cancel the current call if a SIP phone receives
another call from the same transceiver while a call is incoming.
Select whether or not to check the availability of a destination
transceiver when a SIP phone makes a call to it.
If this setting is enabled, the RoIP gateway will stop sending a call to
a linked transceiver if the destination transceiver is busy, or it does not
answer in 5 seconds.
Set when the Target Availability Check (2) will occur.
• After Call:
• Prior to Call: Checks before a call is established
Checks after a call is established
13-50
(Default: Disable)
(Default: Enable)
(Default: After Call)