Vanderbilt SPC4 Series Installation & Configuration Manual page 94

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
LCD keypad
Number Name
1 LCD display
2 Alphanumeric
keys
3 Leverage
access tabs
4 Back
assembly
securing
screw
5 LED status
indicators
6 Soft function
keys
© Vanderbilt 2018
Description
The keypad display (2 lines x 16 characters) shows all alert and warning messages and
provides a visual interface for programming the system (engineer programming only).
The display can be adjusted for contrast and under which conditions the backlight
comes on.
Alphanumeric keypad allow for both text and numeric data entry during programming.
Alphabetic characters are selected by applying the appropriate number of key presses.
To switch between upper and lower case characters, press the hash (#) key. To enter a
numeric digit, hold down the appropriate key for 2 seconds.
The leverage access tabs provide access to the keypad back assembly clips. Users
can unhinge these clips from the front assembly by inserting a 5mm screwdriver into the
recesses and pushing gently.
This screw secures the front and back assemblies on the keypad. This screw must be
removed to open the keypad.
The LED status indicators provide information on the current status of the system as
detailed in the table below.
The left and right soft function keys are context sensitive keys to navigate through
menus/programming.
94
Keypad user interface
A6V10276959-d
12.09.2018