Vanderbilt SPC4 Series Installation & Configuration Manual page 49

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Number
1
2
3
4
WARNING: If the wall fixing plate is not accurately aligned then the housing will not sit properly on
its fixings.
Wiring the Back Tamper Switch to the Control Panel
All control panels have spare inputs configured as tamper inputs that are designed for wiring the tamper
switch and do not require any programming.
This tamper switch will be referred to as 'Aux Tamper 1' by the system.
© Vanderbilt 2018
Description
Housing
Wall
Wall Fixing Plate
Tamper Switch
49
Mounting system equipment
A6V10276959-d
12.09.2018