Vanderbilt SPC4 Series Installation & Configuration Manual page 130

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Name Description
FUNCTION Enables you to assign behaviour to specific keys for specific areas.
KEYS
Select an area and assign one of the following options to that area:
VISUAL Enables you to assign specific behaviour to each LED on the indicator module. Each of the
INDICATIONS LEDs has the following options:
(Flexible Mode
only)
LED ALWAYS Enable if LED indicators remain active when keys are deactivated.
AUDIBLE IND. Select the audible indicators for alarms, entry/exit, and keypresses,
(Flexible Mode
only)
DEACTIVATION Choose one, or more, of the following deactivation options:
(Flexible Mode
only)
© Vanderbilt 2018
None
l
Unset
l
Partset A
l
Partset B
l
Fullset
l
Toggle Unset/Fullset
l
Toggle Unset/Partset A
l
Toggle Unset/Partset B
l
All Okay
l
Setting Authorisation
l
FUNCTION — the following options are available:
l
– KEYSWITCH — select a keyswitch and the position of the key.
– DISABLED — select to disable the LED.
– SYSTEM — select the alarm type which triggers the LED.
– AREA — select the area which triggers the LED.
– ZONE — select the zone which triggers the LED
– DOOR — select the door and the door option which triggers the LED.
ON – COLOR — specify the activation colour
l
ON – FLASH — specify the behaviour of the LED in active state. Available options are:
l
– Permanent — always on.
– Flash Fast/Medium/Slow — varying speed of the flashing.
OFF – COLOR — specify the deactivation colour.
l
OFF – FLASH — specify the behaviour of the LED in the inactive state. Available options
l
are:
– Permanent — always on.
– Flash Fast/Medium/Slow — varying speed of the flashing.
Calendar – select a calendar from the available options.
l
Keyswitch – select a keyswitch from the available options.
l
Keypad - select a keypad from the available options.
l
Card Reader – enable or disable deactivation using a keypad.
l
130
Engineer programming via the keypad
A6V10276959-d
12.09.2018