Vanderbilt SPC4 Series Installation & Configuration Manual page 322

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
the SPC Connect server.
An SPC Connect ATS is added to the Event Sequence Table with the following attributes:
SPC Connect ATS Registration ID
l
Default ATP over Ethernet. For information on ATP fields, see Add ATP to FlexC RCT on
l
page 314.
Default Events Profile for SPC Connect
l
Default Commands Profile for SPC Connect
l
Default RCT URL is www.spcconnect.com
l
The SPT Account Code for the ATP is populated.
l
Make a note of the SPC Connect ATS Registration ID and provide this to the customer along
l
with the SPC Connect System User Guide.
17.11.2.5 Exporting and Importing an ATS
ATS files have a .cxml extension. You must create the ATS in the SPC browser and export it before you
can import it to a system.
1. To export an ATS, go to Communications > FlexC > FlexC ATS.
2. In the Configured ATS table, locate the ATS to export and click the Export ATS button (green
arrow).
© Vanderbilt 2018 322
Engineer programming via the browser
A6V10276959-d
12.09.2018