Vanderbilt SPC4 Series Installation & Configuration Manual page 17

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
EN50131 Requirement (and relevant section)
Programmable functions provided
How indications are made inaccessible to level 1 users when
level 2, 3 or 4 user is no longer accessing the information (see
8.5.1)
Masking/reduction of range signals/messages processed as
"fault" or "masking" events (see 8.4.1, 8.5.1 and Table 11)
Prioritization of signal and message processing and indications
(see 8.4.1.2, 8.5.3)
Minimum number of variations of PIN codes, logical keys,
biometric keys and/or mechanical keys for each user (see 8.3)
Method of time-limiting internal WD for level 3 access without
level 2 authorization (see 8.3.1)
Number and details of disallowed PIN codes (see 8.3.2.2.1)
Details of any biometric authorization methods used (see
8.3.2.2.3)
Method used to determine the number of combinations of PIN
codes, logical keys, biometric keys and/or mechanical keys
(see 11.6)
Number of invalid code entries before user interface is disabled
(see 8.3.2.4)
Details of means for temporary authorization for user access
(see 8.3.2)
© Vanderbilt 2018
Relevant Vanderbilt documentation
Engineer programming via the keypad on
page 112
Engineer programming via the browser on
page 173
Keypad user interface on page 93
LCD Keypad Settings on page 126
Comfort Keypad Settings on page 127
Configuring an Indicator Expander on page 243
System Options on page 255
Wiring the zone inputs on page 85
SIA Codes on page 374
PIR masking is always reported as a zone
masked event (SIA - ZM). Additionally, anti-
mask can cause an alarm, tamper, trouble or no
additional action depending on configuration
Current defaults of PIR addition effect:
Ireland
Unset - None
Set - Alarm
UK, Europe, Sweden, Swiss, Belgium
Unset - Tamper
Set - Alarm
Using the LCD keypad interface on page 95
Using the Comfort keypad interface - see About
the Comfort keypad on page 99
User PIN combinations on page 382
Not supported - Engineer cannot access system
without permission.
Automatic inhibits on page 382
Not applicable
User PIN combinations on page 382
Access PINs on page 383
User Menus – Grant Access
17
Directives and standards
A6V10276959-d
12.09.2018