Vanderbilt SPC4 Series Installation & Configuration Manual page 185

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Name Description
Type The type of power supply unit (PSU).
Version The version of the PSU.
Mains Status Displays the condition of the mains connection. Possible values are Fault or OK.
Temperature Displays the temperature of the PSU.
Load voltage The voltage on the PSU
Load Current The current drawn by the PSU.
Charge Displays the condition of the battery charge.
Status
Primary Displays the condition of the primary circuit which supplies power when the mains is
Circuit connected.
Charge Displays the condition of the charge circuit which charges the batteries when the mains is
Circuit connected.
Battery Displays the charge status, voltage and current available from the batteries.
Outputs Displays the voltage, fuse condition and tamper condition of the PSU outputs.
17.6.2.3 Keypad Status
1. Select Status > Hardware > X-Bus Status.
2. Select the Keypads tab.
© Vanderbilt 2018 185
Engineer programming via the browser
A6V10276959-d
12.09.2018