Vanderbilt SPC4 Series Installation & Configuration Manual page 217

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
WPA Log
The WPA log displays all the WPA events on the system. To view the WPA log, select Log > System
Log > WPA log.
17.9.1.3 IPAW6-10 personal alarm button
The IPAW6-10 personal alarm button is a device that is used to transmit Panic Alarm messages to the
SPC system.
The user can wear the IPAW6-10 in one or two ways:
IPAW6-10 can be worn as a wrist watch (by inserting the wrist band into the two slits of the
l
appropriate ring holder).
IPAW6-10 can be worn as a pendant by removing the wrist ring holder and replacing it with the
l
pendant ring holder.
Enrol a IPAW6-10 personal alarm button
To enrol the IPAW6-10:
1. In the SPC browser, select Users > Wireless FOB.
2. On the IPAW6-10, press and hold the centre button.
The LED lights up for 1.5 seconds.
3. Click Refresh on the Wireless FOB page to display the IPAW6-10.
4. You can now assign the IPAW6-10 device to a system user.
To assign the IPAW6-10 to a user:
1. Go to Users > Users and click the Edit button beside the user you want to assign the IPAW6-10
to.
2. On the Edit user settings page, click the Unknown Fob button.
A list of unassigned fobs is displayed.
3. Click the Add button to assign the IPAW6-10 to the user.
4. On the Edit user settings page click Save.
© Vanderbilt 2018 217
Engineer programming via the browser
A6V10276959-d
12.09.2018