Vanderbilt SPC4 Series Installation & Configuration Manual page 16

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
EN50131 Requirement (and relevant section)
Installation, commissioning and maintenance instructions,
including terminal identifications
Type of interconnections (see 8.8)
Details of methods of setting and unsetting possible (see 11.7.1
to 11.7.3 and Tables 23 to 26)
Serviceable parts
Power supply requirement if no integrated PS
Where PS is integrated, the information required by EN 50131-
6:2008, Clause 6
Maximum number of each type of ACE and expansion device.
Current consumption of the CIE and each type of ACE and
expansion device, with and without an alarm condition.
Maximum current rating of each electrical output
© Vanderbilt 2018
Relevant Vanderbilt documentation
Mounting system equipment on page 43
Controller hardware on page 68
Technical data:
SPC4000 on page 31
l
SPC5000 on page 33
l
SPC6000 on page 37
l
Wiring the X-BUS interface on page 75
User programming via the keypad:
Setting/Unsetting on page 279
l
Configuring a Keyswitch Expander on
l
page 245
Configuring wireless fob devices on
l
page 110
Triggers on page 292
l
Technical data:
SPC4000 on page 31
l
SPC5000 on page 33
l
SPC6000 on page 37
l
See installation instructions for SPCP33x and
SPCP43x Expander PSUs.
Technical data:
SPC4000 on page 31
l
SPC5000 on page 33
l
SPC6000 on page 37
l
Wiring the X-BUS interface on page 75
Technical data:
SPC4000 on page 31
l
SPC5000 on page 33
l
SPC6000 on page 37
l
See relevant installation instructions.
Technical data:
SPC4000 on page 31
l
SPC5000 on page 33
l
SPC6000 on page 37
l
16
Directives and standards
A6V10276959-d
12.09.2018