Vanderbilt SPC4 Series Installation & Configuration Manual page 240

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
17.10.1.4 X10 Config - Settings
The X10 settings page allows you to configure the operation of X10 on the panel.
1. Select Configuration > Outputs > X-10.
The following page will be displayed:
2. Activate the checkbox Enable to enable X10 operation on the panel.
3. Activate the checkbox Log to enable logging of all X10 events on the panel.
4. Click Save.
5. Click an alphabetic tab (A-P) to program X10 device triggers.
A list of programmable device triggers (1–16) will be presented for that alphabetic character.
Unit
number
Active
Description This field displays a description that is used to help identify the device – for
Quick key
© Vanderbilt 2018
This is the number (1–16) that is assigned to the device.
This field indicates if the device is active or not.
example, downstairs light (16 characters max).
This field indicates if the X10 device activation can be toggled by entering a code
from the keypad.
240
Engineer programming via the browser
A6V10276959-d
12.09.2018