Vanderbilt SPC4 Series Installation & Configuration Manual page 333

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Adding an EDP Receiver
1. Select Communications > Reporting > EDP.
The following page will be displayed:
2. Click the Add button.
The following page will be displayed.
3. See table below for further information.
Description
Receiver ID
See also
Editing EDP Receiver Settings below
Editing EDP Receiver Settings
1. Select Communications > Reporting > EDP > Edit.
The following page will be displayed.
© Vanderbilt 2018
Max. 8 receivers can be added to the SPC system.
Enter a text description of the receiver.
Enter a unique number which will be used by the EDP to identify the receiver.
333
Engineer programming via the browser
A6V10276959-d
12.09.2018