Vanderbilt SPC4 Series Installation & Configuration Manual page 339

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Settings
Early/Late
Inhibits
Door Events Door events are activated. Only works with SIA protocol.
Other
Other (Non
standard)
Network
Areas
Editing EDP settings
1. Select Communications > Reporting > EDP > Settings.
The following page will be displayed.
© Vanderbilt 2018
System is Set and Unset.
Unscheduled setting and unsetting of the system.
Inhibit and isolate operations are performed on the system.
All other types of events are detected on the system.
Non supported SIA codes used with SPC COM XT including Camera
Online/Offline events.
Report IP Network Polling Up/Down events.
Select specific areas to which above events apply.
339
Engineer programming via the browser
A6V10276959-d
12.09.2018