Vanderbilt SPC4 Series Installation & Configuration Manual page 100

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Number Name
1 LED status
indicators
2 LCD display
3 Soft function
keys
4 Enter key
5 Back menu
key
6 Proximity
device
receiver area
7 Alphanumeric
keys
© Vanderbilt 2018
Description
The LED status indicators provide information on the current status of the system as
detailed in LED description on page 103.
The keypad display shows all alert and warning messages and provides a visual
interface for programming the system (engineer programming only). (See Prioritization
of display messages on the facing page.) The display can be configured under which
conditions the backlight comes on.
Context sensitive keys to navigate through menus/programming.
Confirm display or input.
Go back in the menu.
Reset buzzers, siren and alarms in the memory.
Only SPCK 623: If the keypad has been fitted with a proximity device receiver, users
should present the Portable ACE Fob to within 1 cm of this area.
Alphanumeric keypad allow for both text and numeric data entry during programming.
Alphabetic characters are selected by applying the appropriate number of key presses.
To switch between upper and lower case characters, press the hash (#) key. To enter a
numeric digit, hold down the appropriate key for 2 seconds.
100
Keypad user interface
A6V10276959-d
12.09.2018