Vanderbilt SPC4 Series Installation & Configuration Manual page 228

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
17.9.2.4 WRMT remote control
The WRMT 4-button Remote is a device which allows a user to remotely operate the SPC system. The
device supports UNSET, FULLSET, PARTSET functionality, as well as the operation of defined outputs
and an SOS feature.
1
2
3
4
5
6
Enrol a WRMT remote control
To enrol the WRMT:
1. In the SPC browser, select Users > Wireless FOB.
2. On the WRMT, press and hold both SOS buttons.
The LED blinks Red once and then Green.
3. Click Refresh on the Wireless FOB page to display the WRMT.
4. You can now assign the discovered WRMT to a system user.
© Vanderbilt 2018
Fullset
Partset
Unset
Output
Panic/SOS
LED
228
Engineer programming via the browser
A6V10276959-d
12.09.2018