Vanderbilt SPC4 Series Installation & Configuration Manual page 131

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Name Description
MODE Select Linked or Flexible. Linked mode reduces the number of options available in the
Expander Edit menu.
INPUT Select the zone
Editing Keyswitch Expanders
The following table lists the available options for keyswitch expanders:
Name Description
DESCRIPTION Enter or edit a description for the expander.
LOCATION Select a location for the expander from the list of defined areas.
LATCH Enable or disable the latch on the key position.
VISUAL Enables you to assign specific behaviour to each LED on the keyswitch expander. Each of
INDICATIONS the LEDs has the following options:
(Flexible mode
only)
DEACTIVATION Select a deactivation method from the available options:
(Flexible mode
only)
© Vanderbilt 2018
FUNCTION — the following options are available:
l
– KEYSWITCH — select a keyswitch and the position of the key.
– DISABLED — select to disable the LED.
– SYSTEM — select the alarm type which triggers the LED.
– AREA — select the area which triggers the LED.
– ZONE — select the zone which triggers the LED
– DOOR — select the door and the door option which triggers the LED.
ON – COLOR — specify the activation colour
l
ON – FLASH — specify the behaviour of the LED in active state. Available options are:
l
– Permanent — always on.
– Flash Fast/Medium/Slow — varying speed of the flashing.
OFF – COLOR — specify the deactivation colour.
l
OFF – FLASH — specify the behaviour of the LED in the inactive state. Available options
l
are:
– Permanent — always on.
Flash Fast/Medium/Slow — varying speed of the flashing.
l
Calendar — select a calendar.
l
131
Engineer programming via the keypad
A6V10276959-d
12.09.2018