Vanderbilt SPC4 Series Installation & Configuration Manual page 285

Table of Contents

Advertisement

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Door timers
Timer
Min. Max.
Access
1 s
255 s
granted
Access
1 s
255 s
deny
Door open
1 s
255 s
Door left
1
180
open
min
min
Extended
1 s
255 s
Escort
1 s
30 s
Door calendar
Door
Select a calendar which should lock the door during the configured time. No card/pin will be
locked
accepted during this time.
Door
Select a calendar which should unlock the door. The door will be unlocked during the configured
locked
time.
Door triggers
Trigger
Triggers that will
Momentarily Unlock
door
Trigger that will lock
the door
Trigger that will
unlock the door
Trigger that will set
the door to normal
Door Interlock
Door interlock is feature that prevents the remaining doors in an interlock group from opening if any one
door in the group is open.
The following are example of how this feature is used:
In two-doors entry systems used in some banks and other buildings. Usually push buttons or
l
card readers are used to gain entrance, and red and green LEDs show if the door can be opened
or not.
In ATM technical areas connecting ATM doors. Typically all the ATM doors in addition to the
l
door that gives access to the area would be interlocked.
© Vanderbilt 2018
Description
The time the lock will remain open after granting access.
The duration after which the controller will be ready to read the next event after a
invalid event.
Duration within which the door must be closed to prevent a "door open too long"
alarm.
Duration within which the door must be closed to prevent a "door left open" alarm.
Additional time after granting access to a card with extended time attribute.
Time period after presenting a card with escort attribute within a user without
escort right can access the door.
Description
If the assigned trigger is activated, the door will unlock for a defined period, then lock
again.
If the assigned trigger is activated, the door will get locked. No card/PIN will be
accepted.
If the assigned trigger is activated, the door will get unlocked. No card/PIN will be
needed to open the door.
If the assigned trigger is activated, the door will get back to normal operation. This is to
undo locking/unlocking of the door. A card/will be is needed to open the door.
285
Engineer programming via the browser
A6V10276959-d
12.09.2018

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents