Vanderbilt SPC4 Series Installation & Configuration Manual page 251

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
3. Configure the fields as described in the table below.
Description
Function Keys (in idle state)
Panic
Fire
Medical
Fullset
Partset A
Partset B
Visual indications
Backlight
Backlight
Intensity
Indicators
Setting state
Logo
Analog Clock Select position of clock if visible in idle mode. Options are Left Aligned,
Emergency
Keys
Direct Set
Human Icon
Audible indications
Alarms
Entry/Exit
Chime
Keypress
Voice
Annunciation
Partset
Buzzer
© Vanderbilt 2018
Enter a unique description to identify the keypad.
Select Enable, Disable or Enabled Silent. If enabled, panic alarm is
activated by pressing F1 and F2 soft keys together.
Enable to allow fire alarm to be activated by pressing F2 and F3 soft keys
together.
Enable to allow medical alarm to be activated by pressing F3 and F4 soft
keys together.
Enable to allow Fullset to be activated by pressing F2 key twice.
Enable to allow Partset A to be activated by pressing F3 key twice.
Enable to allow Partset B to be activated by pressing F4 key twice.
Select when keypad backlight is on. Options are: On after key is pressed;
Always on; Always off.
Select the intensity of illumination of the backlight. Range 1–8 (High).
Enable or disable the LED's on the keypad.
Enable if setting state should be indicated in idle mode. (LED)
Enable if logo should be visible in idle mode.
Center Aligned, Right Aligned or Disabled.
Enable if Panic, Fire and Medical function keys should be indicated in the
LCD display.
Enable if Fullset/Partset function keys should be indicated in the LCD
display.
Enable if Mapping Gate should be indicated.
Select speaker volume for alarm indications or disable sound.
Range is 0–7 (Max volume)
Select speaker volume for entry and exit indications or disable sound.
Range is 0–7 (Max volume)
Select speaker volume for chime or disable sound.
Range is 0–7 (Max volume)
251
Engineer programming via the browser
A6V10276959-d
12.09.2018