Vanderbilt SPC4 Series Installation & Configuration Manual page 45

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Number
1
2
3
4
An optional external antenna must be fitted to housings with metallic lid if the wireless functionality is
required. If an antenna is fitted to the unit, it must be enabled in the firmware.
The SPC G3 housing provides 3 screw holes for wall mounting the unit (see item 1 below).
Screws with a 4–5mm shank, a minimum head diameter of 8mm and a minimum length of 40mm are
recommended for mounting the housing. Additional expansion plugs or fixings may be required
depending on the construction of the wall.
© Vanderbilt 2018
Description
Expanders/PSU
Controller
Expanders/PSU
Battery
45
Mounting system equipment
A6V10276959-d
12.09.2018