Vanderbilt SPC4 Series Installation & Configuration Manual page 39

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Power consumption
Operating current
Quiescent current
Output voltage
Low voltage trigger
Overvoltage protection
Peak to Peak ripple
Auxiliary power (nominal)
Battery type
(Battery not supplied)
Battery charger
Battery protection
Software update
Calibration
© Vanderbilt 2018
SPC6330: Max. 200mA at 230V AC
l
SPC6350: Max. 500mA at 230V AC
l
SPC6330: Max. 200mA at 12V DC
l
SPC6350: Max. 210mA at 12V DC
l
SPC63xx Controller: Max. 170mA at 12V DC (195mA with PSTN, 300mA
with GSM, 325mA with PSTN and GSM)
SPC6330: 13–14V DC in normal conditions (mains powered and fully
l
charged battery), min. 10.5V DC when powered by secondary device
(before system shut down to battery deep discharge protection)
SPC6350: 13–14V DC in normal conditions (mains powered and fully
l
charged battery), min. 10.5V DC when powered by secondary device
(before system shut down to battery deep discharge protection)
11V DC
SPC6330: 15.7V DC
l
SPC6350: 15V DC nominal
l
Max. 5% of output voltage
SPC6330: Max. 750mA at 12V DC
l
SPC6350: Max. 2200mA at 12V DC (8 separately fused outputs, 300mA
l
per output)
SPC6330:
YUASA NP17-12FR (12V/17Ah) - NF
l
YUASA Yucel Y17-12IFR (12V/17Ah)
l
YUASA Yucel Y24-12FR (12V/24Ah)
l
PowerSonic PS12170 (12V/7Ah)
l
PowerSonic PS12260 (12V/26Ah)
l
SPC6350:
YUASA NP17-12FR(12V/17Ah) - NF
l
FIAMM FGV22703 (12V/27Ah) - NF
l
YUASA NPL24-12IFR (12V/24Ah)
l
Alarmcom AB1227-0 (12V/27Ah)
l
PowerSonic PS12260 (12V/26Ah)
l
SPC63xx: Max. 24h to 80% of battery capacity
SPC6330: Current limited to 1A (fuse protected), deep discharge
l
protection at 10.5V DC +/- 3%
SPC6350: Current limited to 2A (protected by PTC resettable fuse), deep
l
discharge protection at 10.5V DC, low voltage indicator at 11V DC
Local and remote upgrade for controller, peripherals and GSM/PTSN modems.
No calibration checks required (calibrated at manufacturing)
39
Technical Data
A6V10276959-d
12.09.2018