Vanderbilt SPC4 Series Installation & Configuration Manual page 321

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Edit Installation Details
The installation details are passed to the RCT to help the operator to identify the panel.
1. Click the Edit Installation Details button.
2. Complete the fields in the table below.
ATS Installation ID
Company ID
Company Name
ATS Installation Address
GPS Coordinates
ATS Installer Name
Installer Phone Number 1
Installer Phone Number 2
Notes
3. Click Save.
17.11.2.4 Configuring an SPC Connect ATS
The Add SPC Connect ATS functionality opens a communication between the panel (SPT) and the
SPC Connect server (RCT), www.spcconnect.com. Using the generated SPC Connect ATS
Registration ID, a panel user can register a user account and panel with the SPC Connect website to
access their panel remotely.
1. To configure an SPC Connect ATS, go to Communications > FlexC > FlexC ATS.
2. On the ATS Configuration page, click Add SPC Connect to open a communication path with
© Vanderbilt 2018
The ID of the ATS Installation (1–999999999).
For future use.
Name of the company.
The address of the ATS installation.
The GPS coordinates of the installation.
The name of the installer of the ATS.
The phone number of the installer of the ATS.
The phone number of the installer of the ATS.
Any additional information for the RCT.
321
Engineer programming via the browser
A6V10276959-d
12.09.2018