Vanderbilt SPC4 Series Installation & Configuration Manual page 303

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
SMS system options
Once a modem is installed and the SMS feature enabled, for SMS operations the SPC system must
apply the SMS Authentication.
1. Select Configuration > System > System Options.
2. Select the desired option from the drop-down menu SMS Authentication:
l
l
l
l
l
SMS commands
See SMS Commands on page 205 for more information.
GSM modem
Prerequisite
A GSM modem must be properly installed and functioning correctly.
o
1. Select Communications > Communications > Modems.
2. Click Configure.
3. Configure the following fields.
SGM Modem settings
Country Select the country that the SPC system is installed in.
SIM PIN Enter the PIN for the SIM card installed in the GSM module.
Wireless GSM only
Technology
Select the signal type that you wish to the modem to use:
2G Only
l
This option enables connection to 2G networks only.
3G Only (Default)
l
This option enables connection to 3G networks only.
Search 2G First
l
This option forces the modem to connect to 2G networks where available. If 2G is not
available, the modem connects to 3G.
Search 3G First
l
This option forces the modem to connect to 3G networks where available. If 3G is not
available, the modem connects to 2G.
© Vanderbilt 2018
PIN Only: This is a valid user code. See Creating system users on page 108.
Caller ID Only: This is the phone number (including 3-digit country prefix code) as
configured for User SMS Control. Only when this option is selected will the SMS Control be
available for configuration by the user.
PIN and Caller ID
SMS PIN Code Only: This is a valid PIN code configured for the user which different from
the user's login code. Only when this option is selected will the SMS Controls be available
for configuration by the user.
SMS PIN Code & Caller ID
303
Engineer programming via the browser
A6V10276959-d
12.09.2018