Vanderbilt SPC4 Series Installation & Configuration Manual page 267

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Timer Description
External Bell Duration that the strobe output will be active when an alarm is activated. (1–999
Strobe minutes; 0 = indefinitely)
STROBE TIME
Alerts
Mains Delay The time after a mains fault has been detected before an alert is activated by the
system. (0–60 minutes)
MAINS SIG
DELAY
RF Jamming The time after RF Jamming has been detected before an alert is activated by the
Delay system. (0–999 seconds)
Engineer
Engineer The timer for the Engineer access starts as soon as the user enables the Engineer
Access Access. (0–999 minutes; 0 indicates no time limitation for system access)
ENGINEER
ACCESS
Engineer auto Duration of inactivity after which the engineer will be automatically logged out. (0–
log out 300 minutes)
ENG AUTO
LOG OUT
Keypad
Keypad Timeout The number of seconds that an RKD will wait for key entry before it leaves the
current menu. (10–300 seconds)
KEYPAD
TIMEOUT
Keypad The duration a keypad will wait in idle before switching language to default. (0–
Language 9999 seconds; 0 = never)
KEYPAD
LANGUAGE
Fire
Fire Pre-alarm Number of seconds to wait before reporting fire alarm for zones with 'Fire pre-
alarm' attribute set. See Editing a zone on page 272. (1–999 seconds)
FIRE PRE-
ALARM
Fire recognition Extra time to wait before reporting file alarm for zones with 'Fire pre-alarm' and
'Fire Recognition' attributes set. See Editing a zone on page 272. (1–999 seconds)
FIRE
RECOGNITION
PIN
PIN Valid Period for which pin is valid. (1–330 days)
PIN VALID
© Vanderbilt 2018 267
Engineer programming via the browser
Default
15min.
0min.
0min.
0min.
0min.
30sec.
10sec.
30sec.
120sec.
30 days
A6V10276959-d
12.09.2018