Vanderbilt SPC4 Series Installation & Configuration Manual page 263

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
System
Restriction
Option
Engineer
Restore
Engineer Exit
Allow Engineer
Allow
Manufacturer
SMS
SMS
Authentication
Policy
Web Only System Policy
Web Only Timing Policy
Web Only Output
Configuration
Web Only System Alert
Policy
Web Only Zone Alarm
Policy
© Vanderbilt 2018
Description
(Impact only if Region "UK" is chosen): If this option is enabled, then the
engineer has to restore the confirmed alarms. This option works together with
the function "Confirmation".
If enabled, the engineer is allowed to leave Full Engineer mode with alerts
active.
Enable this feature to ensure that the engineer can only access the system if
the user allows it.
If disabled, ENABLE ENGINEER menu option on keypad is not available.
Note: Only available if Security Grade is 'Unrestricted'. For Grade 2/3, user
control of engineer access to system is always available.
Enable this feature to ensure that the engineer can only access the system if
the user allows it.
If disabled, ENABLE MANUFACTURER menu option on keypad is not
available.
Note: Only available if Security Grade is 'Unrestricted'. For Grade 2/3, user
control of engineer access to system is always available if user type is
'Manager'.
Select one of the following options:
PIN Code Only: This is a valid user code.
l
Caller ID Only: This is the phone number (including three-digit country
l
prefix code) as configured for user SMS control. SMS control will only be
available for configuration by the user when this option is selected.
PIN and Caller ID
l
SMS PIN Code Only This is a valid PIN code configured for the user which
l
is different from the user's login code. SMS controls will only be available
for configuration by the user when this option is selected.
SMS PIN Code & Caller ID.
l
Configure engineer login and tamper reporting behavior for system.
Display system timing policy.
Click the Edit button to configure latch and autoset output settings (see
Configuring system latch and auto set outputs on page 239).
This programming option allows you to restrict the user and engineer's ability to
restore, Isolate and inhibit alerts. The manner in which the system reacts to
alerts can also be programmed.
Select whether particular zone alarms can be restored, inhibited or isolated by
the user and engineer.
263
Engineer programming via the browser
A6V10276959-d
12.09.2018