Vanderbilt SPC4 Series Installation & Configuration Manual page 172

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
ADD If SPC CONNECT was disabled during the start up wizard, the ADD menu displays.
Select ADD to create an SPC Connect ATS. This allows a panel user to register their panel
and access their panel remotely using the SPC Connect website,
https://www.spcconnect.com
REGISTRATION If SPC CONNECT was enabled during the start up wizard, the panel registration ID
ID displays. Provide this information to an end user to allow them to register their panel with
the SPC Connect website, https://www.spcconnect.com, for remote access to their panel.
COMPANY ID For future use.
DELETE To remove an SPC Connect ATS from a panel, select DELETE.
© Vanderbilt 2018 172
Engineer programming via the keypad
A6V10276959-d
12.09.2018