Vanderbilt SPC4 Series Installation & Configuration Manual page 223

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
5. When the sensor is found, click the Add button.
6. Set the sensor attributes.
7. The sensor appears in the Enrolled Sensors List.
Programmable attributes for wireless sensors
Description Text description of the sensor.
Sensor Type The type of wireless sensor detected (e.g. magnetic contact, PIR).
Zone The zone number to which the sensor has been enrolled.
Zone Type The type of zone (e.g. Alarm, Entry/Exit).
Area Areas to which the zone is assigned.
Edit a sensor
To edit a sensor:
1. Click the Edit button beside the sensor you want to edit.
2. Edit the sensor attributes.
3. Click Save to save your changes.
© Vanderbilt 2018 223
Engineer programming via the browser
A6V10276959-d
12.09.2018