Vanderbilt SPC4 Series Installation & Configuration Manual page 229

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
To assign the WRMT to a user:
1. Go to Users > Users and click the Edit button beside the user you want to assign the WRMT to.
2. On the Edit user settings page, click the Unknown Fob button.
A list of unassigned fobs is displayed.
3. Click the Add button to assign the WRMT to the user.
4. On the Edit user settings page click Save.
Delete a WRMT remote control
To delete a WRMT:
1. Go to Configuration > Hardware > Wireless > Transceiver list.
2. Click the Delete button beside the WRMT that you want to delete.
When you delete a WRMT from your system, you must also clear the internal registration in the WRMT
before you can re-use the WRMT.
To clear the internal registration:
On the WRMT, press and hold the PARTSET and UNSET buttons.
l
The LED blinks Red and Orange to confirm that registration is cleared.
© Vanderbilt 2018 229
Engineer programming via the browser
A6V10276959-d
12.09.2018