Vanderbilt SPC4 Series Installation & Configuration Manual page 219

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Enrol a IRCW6-11 remote control
To enrol the IRCW6-11:
1. In the SPC browser, select Users > Wireless FOB.
2. On the IRCW6-11, press and hold any button.
The LED lights.
3. Click Refresh on the Wireless FOB page to display the IRCW6-11.
4. You can now assign the discovered IRCW6-11 to a system user.
To assign the IRCW6-11 to a user:
1. Go to Users > Users and click the Edit button beside the user you want to assign the IRCW6-
11 to.
2. On the Edit user settings page, click the Unknown Fob button.
A list of unassigned fobs is displayed.
3. Click the Add button to assign the IRCW6-11 to the user.
4. On the Edit user settings page click Save.
Delete a IRCW6-11 remote control
To delete a IRCW6-11:
1. Go to Configuration > Hardware > Wireless > Transceiver list.
2. Click the Delete button beside the IRCW6-11 that you want to delete.
© Vanderbilt 2018 219
Engineer programming via the browser
A6V10276959-d
12.09.2018