Vanderbilt SPC4 Series Installation & Configuration Manual page 246

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
The following dialog is displayed.
3. Configure the fields described in the tables below.
Description
Key Options
Latch
Latch timer
Areas
Location
Visual Indications
Indicator/LED
Function
Function On
Function Off
© Vanderbilt 2018
Enter a description for the keyswitch expander.
Select if key position should be latched.
Enter duration of latch in seconds (0–9999, 0 means latch lasts until key is
turned the other way).
Select the area where the keyswitch is located.
There is 1 indicator/LED on the right and 1 indicator/LED on the left side.
The function for this indicator/LED.
Select the colour and the state for every indicator if the selected function is
ON.
Select the colour and the state for every indicator if the selected function is
OFF.
246
Engineer programming via the browser
A6V10276959-d
12.09.2018