Vanderbilt SPC4 Series Installation & Configuration Manual page 18

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
EN50131 Requirement (and relevant section)
If automatic setting at pre-determined times provided, details of
pre-setting indication and any automatic over-ride of prevention
of set (see 8.3.3, 8.3.3.1)
Details of conditions provided for the set state (see 8.3.3.4)
Notification of output signals or messages provided (see 8.6)
Other output configurations to interface with I&HAS
components (see 8.2)
Criteria for automatic removal of "soak test" attribute (see 8.3.9) Timers on page 264
Number of events resulting in automatic inhibit
If ACE is Type A or Type B (see 8.7) and whether portable or
moveable (see 11.14)
Component data for non-volatile memory components (see
Table 30, step 6)
Life of memory support battery (see 8.10.1)
Optional functions provided (see 4.1)
Additional functions provided (see 4.2, 8.1.8)
Access levels required to access such additional functions
provided
Details of any programmable facility that would render an
I&HAS non-compliant with EN 50131-1:2006, 8.3.13 or
compliant at a lower security grade, with instruction on
consequent removal of compliance labeling (see 4.2 and
8.3.10).
SPC products listed have been tested according to EN50131-6, and all relevant RTC specifications.
© Vanderbilt 2018
Relevant Vanderbilt documentation
Setting/Unsetting on page 279
Setting/Unsetting on page 279
LCD Keypad Settings on page 126
Comfort Keypad Settings on page 127
Editing an output on page 233
Zone types on page 385
Editing an output on page 233
Setting/Unsetting on page 279
User rights on page 201
Editing an output on page 233
Zone types on page 385
Test on page 163
Keypad user interface on page 93
Automatic inhibits on page 382
All devices are hardwired and powered by
system PSUs. See the relevant technical data
on PSUs (separate documents).
See user documentation for SPCK420/421 and
SPCK620/623 keypads.
N/A. Stored in non-volatile memory.
Engineer programming via the keypad on
page 112
Engineer programming via the browser on
page 173
Unrestricted Grade on page 271
Options on page 255
Edit on page 135
User configuration (browser) - see
Adding/Editing a User on page 197
Unrestricted Grade on page 271
Options on page 255
Compliance with EN50131 Approvals on
page 20
18
Directives and standards
A6V10276959-d
12.09.2018