Vanderbilt SPC4 Series Installation & Configuration Manual page 331

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
1. Select Select Communications > Reporting > Analog ARC > Edit > Filter.
The following page will be displayed:
2. Configure the following fields:
Check any of the following boxes if you want to initiate a remote call to the ARC to notify it of the
particular event.
Alarms
Alarm
Restores
Confirmed
Alarms
Alarm
Abort
Faults
Fault
Restores
Settings
Early/Late
Inhibits
© Vanderbilt 2018
Alarms are activated.
System alarms are restored.
Alarms confirmed by multiple zones
Alarm Abort events. Alarms are aborted after a valid user code is entered via
the keypad after a confirmed or unconfirmed alarm,
Faults and tampers are activated.
Fault or tamper alarms are restored.
System is Set and Unset.
Unscheduled setting and unsetting of the system.
Inhibit and isolate operations are performed on the system.
331
Engineer programming via the browser
A6V10276959-d
12.09.2018