Vanderbilt SPC4 Series Installation & Configuration Manual page 329

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
17.11.3.1 Alarm Reporting Centres (ARCs)
The SPC panel has the facility to communicate information to a remote receiving station when a
specific alarm event on the panel has occurred.
These Alarm Reporting Centres must be configured on the panel to allow this remote communication to
operate.
Adding/Editing an ARC using SIA or CID
Prerequisite
PSTN or GSM modem is installed and functioning correctly.
o
1. Select Communications > Reporting > Analog ARC.
The following page will be displayed:
2. Click the Modem1/2 button to make a test call to the ARC from the either modem 1 or modem 2.
3. Click the Log button to receive a log file. A page with the logs from all automatic and manual test
calls will be displayed.
4. To add or edit an ARC, click Add.
– OR -
Click Edit.
The following page will be displayed.
© Vanderbilt 2018 329
Engineer programming via the browser
A6V10276959-d
12.09.2018