Vanderbilt SPC4 Series Installation & Configuration Manual page 337

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Phone Number 2*
Events
Primary Receiver
Re-queue Events
Verification
Event Filter
* EDP dial-up over PSTN is not supported in this release.
See also
Configuring SMS on page 204
Editing Event Filter Settings
1. Select Communications > Reporting > EDP > Edit > Filter.
The following page will be displayed.
© Vanderbilt 2018
Enter a second phone number that the modem(s) will dial in the
event that the first number dialled did not result in a call being
successfully established.
Check this box to indicate that this is the primary receiver. If
unchecked, this is a backup receiver.
Check this box if events that failed to report are to be re-queued for
transmission
Check this box if Audio/Video verification is to be sent to this
receiver.
Click this button to edit the filter events that will trigger an EDP call.
See Editing Event Filter Settings below.
337
Engineer programming via the browser
A6V10276959-d
12.09.2018