Vanderbilt SPC4 Series Installation & Configuration Manual page 34

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Max. number of hardwired
zones
Max. number of wireless zones
Max. number of Intrunet
wireless detectors per wireless
receiver (recommended)
EOL resistor
Relay Outputs
Electronic Outputs
Firmware
Door capacity
Number of card reader
Radio module
Verification
Video
Audio
Field bus 1)
Number of field devices 2)
Connectable field devices
Interfaces
© Vanderbilt 2018
128
120 (take away wired zones)
20
Dual 4k7 (default), other resistor combinations configurable
SPC5320/5330 — 1 strobe (30V DC/1A resistive switching current)
l
SPC5350 — 4 (single-pole changeover, 30V DC/ maximum 1A resistive
l
switching current)
SPC5320/5330 — 5 outputs:
l
– 2 internal/external bells
– 3 programmable. Maximum 400mA resistive switching current per
output, supplied by auxiliary output.
SPC5350 — 8 outputs. Maximum 400mA resistive switching current per
l
output
– 5 standard power outputs
– 3 supervised outputs
V3.x
Max. 16 entry doors or 8 entry/exit doors
Max. 16
Optional (SPCW110)
16 verification zones with max. 4 IP-cameras and 16 audio devices.
Up to 16 pre/16 post event images (by JPEG resolution 320 x 240, max. 1
frame/sec.)
Up to 60sec. pre/60sec. post audio recording
X-BUS on RS-485 (307kb/s)
Max. 48 (16 keypads, 8 door-expanders, 16 input/output expanders)
Keypads: SPCK42x, SPCK62x
l
Door expanders: SPCA210, SPCP43x
l
Expanders with I/O: SPCE65x, SPCE45x, SPCP33x, SPCP35x,
l
SPCE110, SPCE120, SPCV32x
2 X-BUS (2 spurs or 1 loop)
l
2 RS232
l
1 USB (PC connection)
l
SPC53xx: Additionally 1 Ethernet (RJ45)
l
34
Technical Data
A6V10276959-d
12.09.2018