Vanderbilt SPC4 Series Installation & Configuration Manual page 271

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Unrestricted Grade
A Security Grade setting of Unrestricted does not apply to any regionally approved security
restrictions of the installation. Instead, the Unrestricted setting enables an engineer to customize the
installation by changing security policy options and configuring additional options which do not comply
with the selected regional security compliance.
Unrestricted configuration options are denoted in this document by the following symbol:
See System Options on page 255 for details of configuring system policies.
17.10.3.5 Clock
This page allows you to program the date and time on the panel. The controller contains a Real-Time
Clock (RTC) that is battery backed to preserve the time and date information in the event of power
failure.
1. Select Configuration > System > Clock.
The following page will be displayed.
2. Select the Time and Date from the drop down menus.
3. Configure the following fields:
Automatic Daylight Saving Time
Synchronize time with Mains
The selected time and date will be displayed on the keypad, the web interface and the event log.
17.10.3.6 Language
1. Select Configuration > System > Language.
The following page is displayed:
© Vanderbilt 2018
If selected, the system will automatically switch to summer time
If selected, the RTC synchronizes itself with the sine wave in the power line
271
Engineer programming via the browser
A6V10276959-d
12.09.2018