Vanderbilt SPC4 Series Installation & Configuration Manual page 324

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
2. Click Add. The Event Profiles page displays.
3. Enter a Name to identify the event profile.
4. Select the event filter groups to report for this profile by ticking the Report Event checkboxes.
5. To prevent reporting of certain events or addresses within an event, select the event from the
corresponding Add Event Exception dropdown list.
6. Click Add to view the Event Exception Definition page. See Event Exception Definition below.
7. Click Back to return to the Event Profiles page.
8. To apply an event profile to an area, select the area under Area Filter.
9. Click Save and Back. The new profile displays in the Event Profiles table.
You can view a list of all event exceptions for an event profile under Event Exceptions on the Event
Profiles page.
You cannot delete the Default Event Profile, the Default Portal Event Profile or an event profile
that is assigned to an ATS. If you try to delete an event profile that is in use, you will get an error.
Event Exception Definition
Event exceptions allow you to change the following settings for a range of addresses within an event:
Report Event
l
SIA Code
l
CID Code
l
Event Address (for example, Zone IDs, Area IDs, User IDs)
l
© Vanderbilt 2018 324
Engineer programming via the browser
A6V10276959-d
12.09.2018