Vanderbilt SPC4 Series Installation & Configuration Manual page 296

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
3. Configure the camera with the following parameters:
Camera ID
Description Enter a description to identify this camera.
Type
Camera IP
Camera
Port
Username
Password
Command
String
Pre-event
images
Pre-event
interval
© Vanderbilt 2018
System generated Camera ID.
Select from one of the following camera types:
Generic
l
Vanderbilt CCIC1410
l
Vanderbilt CFMC1315
l
Enter the IP address of the camera.
Enter the TCP port the camera listens on. Default is 80.
Note: The CCIC1410 camera can only be used over port 80 only.
Vanderbilt CCIC1410 and CFMC1315 cameras only.
Enter a login username for the camera which will be added to the command string
below when the Update Cmd. String button is clicked.
Vanderbilt CCIC1410 and CFMC1315 cameras only.
Enter a login password for the camera which will be added to the command string
below when the Update Cmd. String button is clicked.
Enter the command string to be sent to the HTTP server on the camera in order to
obtain images. This string should include the user name and password for the
camera. Consult the camera documentation for the specific string required for the
camera type selected.
The default command string for a Vanderbilt CCIC1410 or CFMC1315 camera
with no password is "/cgi-bin/stilljpeg".
Enter the number of pre-event images to record (0–16). Default is 8.
Enter the time interval, in seconds, between pre-event images (1–10). Default is
1 second.
296
Engineer programming via the browser
A6V10276959-d
12.09.2018