Vanderbilt SPC4 Series Installation & Configuration Manual page 147

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
3. Scroll to ZONE and press OK.
4. Scroll to the appropriate zone number (only unoccupied zone numbers are displayed) and press OK.
16.9.3.2 WPAN personal alarm button
The WPAN personal alarm button is a device that is used to transmit Panic Alarm messages to the SPC
system.
The user can wear the WPAN in one of two ways:
WPAN can be worn as a wrist watch (by inserting the wrist band into the two slits of the appropriate
l
ring holder).
WPAN can be worn as a pendant by removing the wrist ring holder and replacing it with the pendant
l
ring holder.
Enrol a WPAN personal alarm button
To enrol the WPAN and assign it to a User(n):
1. Select USERS > EDIT > USER(n) > RF FOB > ENABLED.
The keypad displays the ADD screen with a flashing ENROL DEVICE message.
2. On the WPAN, press and hold the button.
The LEDs on the fob light in the following pattern: Red lights for 3 seconds, then no LED, then Red
lights for 1 second, and then Green lights for 1 second. The WPAN is assigned to User (n).
Disable a WPAN personal alarm button
To disable the WPAN:
Select USERS > EDIT > USER(n) > RF FOB > DISABLED.
A message appears on-screen saying UPDATED.
© Vanderbilt 2018 147
Engineer programming via the keypad
A6V10276959-d
12.09.2018