Vanderbilt SPC4 Series Installation & Configuration Manual page 346

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
NOTICE: The panel must be licensed for use of custom languages and other languages.
To upgrade languages on the system:
1. Select File > Upgrade.
The Panel Upgrade Operations page is displayed.
2. Select the language file to upgrade by clicking the Browse button for the Language File Upgrade
option, selecting the required language file and then clicking on the appropriate Upgrade button.
A list of available languages in this file is displayed.
3. Tick the box beside the language to be installed.
4. Click the Upgrade Selected button.
The Confirm Language Upgrade page is displayed showing any languages that are being
installed.
5. Click the Confirm button.
A message is displayed to indicate if the language upgrade was successful or if it failed.
Deleting Languages
To delete languages from the language file:
© Vanderbilt 2018
A maximum of 4 languages can be installed.
346
Engineer programming via the browser
A6V10276959-d
12.09.2018